免费人成毛片动漫在线播放_大尺度人体私拍国模_色戒床戏做爰未删减视频_用力使劲添再深一点免费视频

      Electricalworkshop mainly produces all kinds of coil, wire rod and rotor magnetic pole for generator. Electrical manufactory covers an area of ??2500 square meters,of which more than 1400 square meters keep constant temperature and humidity, constant pressure, dustproof, to minimize production environment impact on product quality.

      Electrical workshop has copper punching machine, magnetic pole coil pressing machine, ring coil numerical control pressing machine, hot air circulation oven, automatic electromagnetic wire straightening blanking machine and electrical insulation testing room.

      The most advanced numerical control automatic wire rod pressing machine in our country was newly introduced in 2006. It allows wire rod shaped under constant temperature into the mold and the process of heating, heat preservation, water cooling down and pressurization to be controlled automatically. Meanwhile, the electronic process records can be saved. The device can effectively improve internal quality of wire rod after hot curing,.In addition, a hot wire rod with cold depanning, can reduce the deformation after depanning and therefore fully guarantee quality and stability of the wire rod.

Equipment Name：Numerical controlmembrane press  equipment

Rated pressure：35/3MPa     

Rated discharge：0.5/15.5L/min

power supply voltage：AC 380V     

Power of generator：1.5/1.5KW

control voltage：DC 240V     

oil tank volume：500L

Equipment Name：semi-automatic hot pressing machine with box-shape coils

Type：ZCN01A-1600

Voltage：～380V            

Power：6.0kW

Working temperature：5～200℃           

Working pressure：5～60kg/cm2

The length of the windings：260～1600mm       

The distance between the two windings：220～1200mm

cross-section of the windings：＜35×70mm

Equipment name：Double-pressing machine with converting coils bar

Type：ZCN077

Maximum distance between two end of the coil：2200mm          

The distance between two pressing points：50mm

The pressure of the hydraulic pumping station：31.5MPa

Equipment name：Automatic cutting machine with electromagnetism 

Type：ZCN016

Scraping head type：350×30×4m/m    

Electrical heating power：4kW

Scraping machine speed：2970r/min        

Wire wheel type：80×80×φ20

Scraping machine power：2.2kW            

Blowing rate of dust shaker：1700m3/h

Equipment name：HD electric drying oven with forced convection   

Temperature controlling method:Adjusting power of the contactor

Dimension of the operating room：3000×2500×1500mm

Temperature fluctuation：≤±1℃

Temperature Uniformity：≤±2.5%